Sandvik Alpha™ 360
Sandvik Alpha™ 360 is part of the latest development based on our unique and best-selling Sandvik Alpha™ system. With a strong and robust design, it can last twice as long as an industry standard solution - in a wide range of drilling conditions. In addition to superior durability, its excellent hole accuracy also enables outstanding productivity in tunneling and mine development.
STRAIGHT TO THE POINT
We know that drilling accuracy is crucial to ensure desired direction and profile in the tunnel. With high drilling precision in straight and parallel holes, it also improves your advance per blast.
Sandvik Alpha™ 360 takes you where you want to go. It is made for Ø 48 to 51 mm hole sizes in face drilling and bolting, and features a strong and robust thread design. The short thread with a sturdy guide system gives superior resistance towards bending stresses, improves bit guidance and ensure excellent energy transfer. This enables high precision collaring also in complex rock formations and against uneven surfaces.
ADVANTAGES
Increased service life
- Lower cost per meter
- Less time spent changing tools
- A safe and more sustainable choice
Superior hole accuracy
- Increased rate of advance
- Reduced overbreak
BITS AND RODS ASSORTMENT
Discover the full range of Sandvik AlphaTM 360 bits and rods.
BITS | |||||||||
FLUSHING HOLE, MM | BUTTONS, MM | ANGLE | DIMENSION, D | PART NO | REMARK | ||||
FRONT, NO SIZE |
GAUGE, NO SIZE |
FRONT, NO SIZE |
GAUGE, NO SIZE |
FRONT | GAUGE | MM | |||
3x5 | 1x5 | 3x9 | 8x10 | 10° | 35° | 48 | 7581-5148A-S70 | Top Center Bit | |
3x5 | 1x5 | 3x9 | 8x10 | 10° | 35° | 48 | 7581-5148A-S81 | Top Center Bit | |
3x5 | - | 3x8 | 6x10 | 10° | 35° | 49 | 7581-6048-F49 | Speedy Bit | |
3x6 | - | 3x9 | 6x10 | 10° | 40° | 51 | 7581-6051-F49 | Speedy Bit | |
3x5 | 1x5 | 3x9 | 6x10 | 5° | 35° | 48 | 7581-4348A-S70 | SH70 | |
3x5 | 1x5 | 3x9 | 6x10 | 5° | 35° | 48 | 7581-4348A-S81 | GC81 | |
3x5 | 1x5 | 3x9 | 6x10 | 5° | 40° | 49 | 7581-4349A-R70 | SH70 | |
3x6 | 1x6 | 3x9 | 6x11 | 10° | 35° | 51 | 7581-4351A-S70 | SH70 | |
RETRAC BITS | |||||||||
3x6 | 1x6 | 3x9 | 6x10 | - | 35° | 51 | 7581-4651A-R70 | SH70 | |
4x7 | 1x7 | 5x9 | 8x10 | - | 35° | 64 | 7581-4864A-R70 | SH70 | |
REAMING BITS | |||||||||
3x6 | 1x6 | 3x13 | 12x13 | - | 35° | 102 | 7581-5602P-S70 | SH70 | |
3x6 | 1x6 | 3x13 | 12x13 | - | 35° | 102 | 7581-5602P-S81 | GC81 | |
3x7 | 1x7 | 3x13 | 16x13 | - | 35° | 127 | 7581-5627P-S70 | SH70 | |
ROUND RODS | |||||||||
LENGTH (MM) | LENGTH (FT, IN) | DIAMETER (MM) | PART NO | ||||||
4915 | 16' 1 1/2" | 39 | 7324-8149-20 | ||||||
5525 | 18' 1 1/2" | 39 | 7324-8155-20 | ||||||
6135 | 20' 1 1/2" | 39 | 7324-8161-20 | ||||||
HEXAGONAL RODS | |||||||||
LENGTH (MM) | LENGTH (FT, IN) | DIAMETER (MM) | PART NO | ||||||
3700 | 12' 1 1/2" | 35 | 7324-8237-20 | ||||||
4303 | 14' 1 1/2" | 35 | 7324-7343-20 | ||||||
4915 | 16 1 1/2" | 35 | 7324-8249-20 | ||||||
5525 | 18' 1 1/2" | 35 | 7324-8255-20 | ||||||